How Much Does Evaporative Cooler Installation Cost?
|Need a pro near you? Get multiple quotes for free online. Get your quote now >>|
Installing an evaporative cooler has grown to become a practical alternative to air-conditioning, especially in areas with low humidity. Also known as swamp coolers, these devices basically work by pushing hot air outside the home and pulling cool air inside. A cost-effective alternative, it can cost about one-half as much in installation compared with central air conditioners and consume about a quarter of the energy.
How much does it cost?
- On average, to have the evaporative cooler installed, it is going to be between $150 to $375, depending on the complexity. Keep in mind that this will not include the pricing for the cooler itself. Since all jobs are going to be relatively unique, consider getting exact quotes for free from services such as HomeAdvisor.com.
- Remodeling Expense.com provides estimates on the cost to install a swamp cooler. A basic installation job can range from $150.25 to $175.35. For a better level of work, the cost is from $190.50 to $220.05. A premium job can cost $250 to $390.
- According to Toolbase.org, a 4,500 CFM direct evaporative cooler suitable for a 1,500-sq-ft home would cost $800 installed. A two-stage evaporative cooler with a cooling capacity equal to a three-ton conventional system can be bought for $1,800 and when installed can cost about $3,900. This price is going to include the unit.
What is going to be included?
- An evaporative cooler is designed to work by means of a reaction resulting from the collision of humid outdoor air that strikes water-soaked pads contained in the evaporative cooler. While the water goes through the evaporation process, hot air parts from cool air and is led outside the home. As this process occurs, cool air that is anywhere from 15 to 40 degrees cooler than the outdoor temperature is directed inside the home. Through the evaporative cooler, cool air is distributed to individual areas in the house through a network of internal ducts or to a ductless central point.
- Evaporative coolers can be classified according to the following: portable, mobile, window, through-the-wall, down discharge, and side discharge coolers.
- Installing the evaporative cooler can be done in two ways. In the first method, the evaporative cooler is set up in a way so that it blows air into a central point. The other technique involves connecting the cooler to ductwork, which then distributes the air to various areas in the house.
What are the extra costs?
- Certain components in the evaporative coolers need to be replaced on a regular basis, including water-moistened pads and filter. The appropriate cleaning solutions will also need to be obtained to ensure that the cooler is properly cleaned and maintained to ensure its continued efficiency in removing humidity. Dirty filters can also contaminate the air. The pads can cost $40 to $200, depending on the size and brand.
- Accessories may also be required. The purge pump purges water and helps avoid mineral build-up. Ceiling vents may be needed to add ventilation in the attic. Pre-filters help to avoid water droplets from being directed towards the fan blades and also remove dust from the incoming air.
- The actual unit can cost around $250 to as much as $2,000 or more depending on the size and power.
Factors that influence the price:
- Duct installation. If an evaporative cooler requires installing ducts inside the home, the cost to install the cooler rises to a significant level.
- Size. Evaporative coolers are designed to suit various size requirements. The cost to install a cooler for a large home may be higher compared with installing a portable unit, depending on the service provider.
- Location. Labor rates vary differently across the country and service providers may offer different rates to clients, depending on their guidelines. In addition, some providers are contracted on a per-project basis while others on an hourly set-up.
Tips to know:
- An evaporative cooler is recommended only in areas that have low humidity. Due to their efficiency in removing hot air from inside a home, they will do a poor job when installed in a high-humidity location as this can lead to a cool but muggy atmosphere. A swamp cooler is considered an ideal low-cost option for use in properties located in places that have dry, arid climates.
- Central-location installations are appropriate for compact homes that are open from one area or room to another. Ducted systems are necessary for bigger homes that have multiple rooms and hallways.
- Cooling a room or a specific zone in a home can be done by installing a small horizontal-flow cooler in the windows. This option is popular in homes located in places with moderate weather conditions.
- Evaporative coolers need regular, consistent maintenance, but this does not need professional services. To ensure the device’s efficiency, complete cleaning is required once the warm season begins. The water-soaked pads must be replaced with new ones every month during the warm months and at least twice during the cold months. The filter also needs regular replacement.
How can I save money?
- If your home does not have ductwork, avoid costly installation costs by opting for a ductless central location for the evaporative cooler. Doing so eliminates the need to install ductwork in the home.
- Conduct research over the Internet or through phone calls to service providers and inquire about the rates for installation services. Opt for the provider that offers the most cost-effective alternative.
|Help us! Did you get a quote before? Did you make the purchase? Help our community by sharing! Every month, we choose a random comment and award them with a $25 Amazon.com gift card.|