How Much Does a Router Cost?
Wireless routers allow you wireless access to the internet and even a network switch. You no longer need a wired link because connection is possible through radio waves. This eliminates the need for running wires and cables, which can entail cutting holes in the walls and having to figure out how to hide the wires. The router is capable of allowing any computer to hit the same internet connection, and it can also link each computer to the other. This way, the computers can share files and programs with ease. The router can be a flexible option to wireless LAN and wired LAN. The cost of a router will depend on the brand as well as the range of the router.
How much does it cost?
- On average, the cost of a router can vary anywhere between $25 to as much as $135 for a home router. The price will really depend upon the type that you are looking to purchase.
- A Netgear RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports retails for $79, while The Cisco Linksys – Dual-Band Wireless-N Router with 4-Port Ethernet Switch retails for the same price. In addition, the Belkin – N600 Dual-Band Wireless-N+ Router with a 4-Port Switch and USB Port is sold for $69.
- TechBargains.com, for example, sells different routers. The Netgear WNDR3400 N600 802.11n Dual-Band Router retails $79.99. The WD My Net N750 802.11n Dual-Band Wireless Router costs $49.99. You could also purchase the D-Link DIR-645 802.11n Wireless Gigabit Router w/ Smart Beam Technology for $49.99.
What is going to be included?
- Most routers provide an N Router with 4 Ethernet Ports with firewall protection. These 4 ethernet ports allow up to four different computers to be connected to the router. A firewall protects all of the computers on the network from being infiltrated by outside computers. Wireless data transfer rates, depending on the type, can hover around 150Mbps.
- Most have a stand, Ethernet cable, setup DC and power adapter. You will also be provided with an owner’s manual to inform you as to how the router works. Many also use the MIMO smart antenna design to bring better range while removing drops and dead sectors.
- In addition, you will also have 1 year warranty for the router.
What are the extra costs?
- Extra cost would entail on the shipping cost. However, many online stores today offer free shipping for those that reach a minimum purchase order.
- If you want a hard wired connection, Ethernet cables will be required. Plan on spending around $0.25 to $1 per foot for these cables.
- In addition, you need to pay the service provider for your internet connection. If your internet provider does not include a modem, this will be required as well to connect to the internet. A good modem can retail for $50 to $100.
- A network card is a USB adapter that can provide instant access to a router. While optional, these retail for $19 to $35.
- If all of these things are foreign to you, you may want to consider hiring someone to install the router and all the network equipment for you. This installer can set things up to run in the most efficient way possible.
Factors that influence the price:
- Range. This is a measurement as to how far the signal of the router travels. It is typically measured in a lab-type setting.
- Band. A router could come in a single or dual band. Band pertains to the wireless frequency of the wireless router. Dual band routers could broadcast a signal up to 5 GHz bands.
- Letter: A, B, G and N are not just your typical letters. They are few different standards. Once the letter gets higher, the quality of signal also increases.
- Security. You need to make your wireless security seriously. There are different security protocols such as WEP, WPA and WPA 2.
Tips to know:
- Get a good USB functionality. This allows you to connect to a USB thumb drive so you could share files to different users on your network.
- Increase your speed more by getting a router with the N protocol.
- In order to maximize the speed of your connection, turn off devices that are not being used during the time of transfer.
- Because there are so many different levels and forms of routers, you should do a lot of research before determining which one will work for you. While this may not make as big of a difference in the home, it can really affect things in a place of business.
Questions to ask:
- What speed could the wireless router offer?
- Is there USB functionality?
- Does it use an IPv4 or IPv6 address?
How can I save money?
- Check out deals and bargains online. You might just get a good deal on an N protocol if you check deal forums such as Slickdeals.net.
- If you do not mind purchasing refurbished, this is a great way to save more than 50%.
- Even if you do not know how to install the router, chances are you know someone who does. Ask around to see if someone could do it for you for free.