How Much Does a Transmission Flush Cost?
A transmission flush is a critical procedure that needs to be performed according to the vehicle’s recommendation. Without proper maintenance, the transmission becomes vulnerable to breakdowns. By conducting timely transmission flush procedures, contaminants and sludge built up in the transmission are removed and the fluid is changed. As a result, the vehicle will shift smoother, improving its lifespan.
How much does it cost?
- On average, a transmission flush is going to cost anywhere from $85 to as much as $225 depending on the make and model of the car.
- For example, San Jose Auto Repair in San Jose, California, offers transmission fluid and filter service/transmission fluid flush services. The average cost for a transmission fluid flush is $150 to $250 for most cars and up to $375 for lifetime fluids. The average cost for a transmission fluid filter and fluid service is $89 to $159 for most cars and light trucks.
- At Ray’s Garage in Creston, Ohio, the cost of a transmission flush is $139.99, while a transmission flush and filter change costs $219.99. A transmission flush is recommended every 30,000 to 70,000 miles.
- Midas Hawaii in Honolulu, Hawaii, offers transmission flush services for $144.99, which includes a test drive in addition to a transmission fluid change. Extra charges apply to 6-cylinder and 8-cylinder vehicles, large capacity transmissions, as well as extra gaskets and filters.
What is going to be included?
- A transmission flush refers to a maintenance process that removes sludge and grime from the transmission. During this procedure, new fluid, and sometimes cleaning agents, is run through using a professional-grade flushing machine to flush out debris and dirt.
- Once done, the transmission is filled up and replaced with new, clean fluid. How long the process takes usually depends on the type of transmission flush method used and the skills of the service provider.
What are the extra costs?
- Depending on the vehicle, a special kind of fluid may be required for use in the transmission. Using one not specified by the manufacturer can result to partial or full transmission failure. These special fluids often cost more than standard types.
- Many mechanics and auto shops perform a complete check of the vehicle when performing a maintenance procedure. In many cases, such checks reveal components and parts that need repair or replacement.
Factors that influence the price:
- Flush type. Flushing a transmission can be done in a number of ways. One of the most common is using a flushing machine to remove the old fluid. Another method is to use a pump inlet flush, which attaches the machine’s line out to the pump intake of the vehicle. The second option usually costs a bit more because it takes more time and needs more fluid.
- Fluid type. There are diverse kinds of fluids and fluid grades available today for use in a transmission flush procedure. Among the most recommended are full synthetic fluids. However, they do not always work well with all vehicles and can sometimes cause degrading of components, particularly the older vehicle makes and models. Synthetic fluids often cost more than regular ones.
- Labor. Transmission flush done by a professional mechanic or at an auto shop is subject to labor charges . Labor rates vary by geographic location and differ from one auto shop to another.
Tips to know:
- Before doing a transmission flush, be sure to check the owner’s manual and consult with your dealership or local auto shop or service center.
- A thorough service should ideally include removing the pan and inspecting the old fluid for indications of present or potential transmission issues. Also, a transmission flush should ideally be accompanied by filter and gasket replacement.
- The key to proper transmission maintenance is adhering to the vehicle’s owner’s manual. The guidelines provide clear instructions on when to get a transmission flush and how often to get it done.
- Make sure that whoever is performing the transmission flush procedure uses the specific transmission fluid specified in the owner’s manual and not some generic or universal fluid as this can result in problems.
- A reputable mechanic or auto shop staff will recommend a transmission flush if he deems it necessary. He will ask about driving habits, mileage and manufacturer’s recommendations and will perform a thorough check before performing the procedure. He will also provide a reasonable price and will back his work with a warranty.
How can I save money?
- Most auto shops provide printable coupons that offer discounts on certain services, including a transmission flush. Print these coupons and present them to the shop when availing of the service.
- Memberships with certain organizations and signing up for newsletters also offer discounts and special deals from auto centers and repair shops.
- Compare rates offered at different shops to find the most affordable option.
- Stay loyal to the same shop for all these little car maintenance issues. Frequent customers will be more likely to receive special deals.