How Much Does Eyebrow Threading Cost?
Eyebrow threading, a practice that originated in India centuries ago, is a precise technique that removes extra hair from the eyebrow and other areas of the body such as the upper chin, sideburns or upper lip.
This technique involves twisting a cotton thread into a loop and rolling it against the skin, pulling out hair from the roots, leaving a clean, precise hairline in the process.
Eyebrow threading is commonly used to elevate the arch of the eyebrow, eliminate a unibrow and/or enhance the shape of the eyebrow.
It is a natural and safe beauty regimen as it does not involve any chemical-based application like depilatory creams and wax does.
How much does eyebrow threading cost?
On average, eyebrow threading can cost anywhere from as little as $6 to as much as $25. The cost will depend on where you live, where you go and the skill level of the professional.
At Hollywood Beauty Eyebrow Threading in Texas, they charge $8 at their local store and no appointment is required.
Eyebrow threading overview
During the process, an esthetician will use a cotton thread to remove the hair from the root from the eyebrows, creating a shape as desired without using any chemicals. A good session can take about 10 to 30 minutes, depending on the amount of hair that needs to be removed.
What are the extra costs?
Post-treatment creams and applications are available to help soothe red bumps and prevent the growth of ingrown hairs. These post-treatment creams, if needed, can cost $10 to $25, depending on the brand and where they are purchased. Redness and/or swelling may occur, but most of the time, it will subside within 30 minutes.
Gratuity, usually 10 to 20 percent of the total price, is recommended.
Depending on how fast your hair grows back, experts recommend coming back every three weeks for desirable results.
Tips to know:
Some states do regulate this practice, so if you come across a professional for the first time, see if they have to be registered by the state.
As for pain, threading is often compared to a slight burning sensation for up to five seconds, but some people claim it doesn’t hurt at all while others say it can be uncomfortable for a few minutes. If you can handle plucking your eyebrows, then you will be able to handle a threading session.
Threading is considered to be a better option than waxing due to the lack of chemicals often found in wax. As mentioned, since threading only uses a pure cotton thread and nothing more, it’s a great alternative for those with sensitive skin and lasts much longer than waxing since it removes the root of the hair.
Eyebrow threading vs waxing
No chemicals
As mentioned, wax often uses harsh chemicals, such as resins, artificial fragrances, dangerous dyes and carcinogenic parabens, that are bad for your health. With threading, the removal only uses a cotton thread and nothing more.
Great for sensitive skin
Those who have sensitive skin often struggle with hair removal due to the chemical reactions mentioned prior. Aside from waxing, even depilatory creams and tweezing can leave sensitive skin raw or inflamed. With threading, again, it’s all natural, meaning there’s very little contact with the skin, ideal for those who find no other hair removal methods working for their situation.
It’s fast
Threading, when compared to waxing, is much faster than plucking or waxing. Instead of grabbing an individual hair, threading can grab an entire line of hair at once, speeding up the process.
Lasts longer
Waxing not only doesn’t last as long, it can be painful and even some of your unwanted hair, along with your skin, can be removed. Threading has been known to last longer and even be less painful.
Eyebrow threading video
How can I save money?
Check out Groupon.com as they always have daily deals for local spas offering eyebrow threading sessions. At the time of this writing, for example, we had found deals as cheap as $5 after using a coupon code.
How Much Does an Eyebrow Tattoo Cost?
Eyebrow tattoos, considered to be a cosmetic tattoo, is implanted into the dermal layer of the skin and is done to create a long-lasting look that mimics the look of makeup.
How much does an eyebrow tattoo cost?
The average costs of a permanent or semi-permanent eyebrow tattoo will greatly depend on the artist, the complexity of your eyebrows, the method being used, the colors and where you live. In most cases, a permanent eyebrow tattoo can cost $250 to $775. If you’re looking to simply define your eyebrows, such as filling in some patches, then this often considered a simple procedure and shouldn’t cost more than $200; however, if you were to greatly alter your eyebrow shape and include various shades of colors, then the costs could be closer to the higher end of the price range.
The popular hair stroke/ microblading eyebrow tattoo method, for example, can cost $500 to $700, with touch-ups, which are required six weeks after the initial procedure costing close to $150. This method, considered to be one of the most sophisticated methods, consists of thin tattooed fibers that match your original eyebrow hair color.
We researched online to see what clinics were charging for the procedure and what costs they had quoted us in the table below:
| City | Price Quoted (for initial visit only) |
|---|---|
| Austin, TX | $600 |
| Brooklyn, NY | $475 |
| Charlotte, NC | $575 |
| Colorado Springs, CO | $750 |
| Detroit, MI | $350 |
| Fort Worth, TX | $325 |
| Gilbert, AZ | $475 |
| La Jolla, CA | $500 |
| Lakeland, FL | $525 |
| Nashville, TN | $275 |
| New York, NY | $610 |
| Ontario, CA | $275 |
| Orange, CT | $450 |
| Rochester, MI | $400 |
| Saint Louis, MO | $475 |
| Scottsdale, AZ | $500 |
| Seattle, WA | $400 |
| Toronto, ON | $325 |
| Yuma, AZ | $550 |
According to more than 200 responses on RealSelf.com, people had paid anywhere from $150 to $450.
SimplyBeautifulFaces.com, an artist located in Arizona, charges $200 to $600.
Glamour Magazine says they don’t come cheap, often costing $400 to $800, depending on where you go and if the consultation fees are involved.
On PrettyGossip.com, the author talked about how she paid between $250 to $300, but she did find a brow salon in Los Angeles that charged up to $900.
Eyebrow tattoo overview
Before your eyebrows are even tattooed, the artist will first discuss the results you’re looking for such as the thickness and length. He or she may also recommend ideas based on your face shape by shaping your face with a marker. Once you agree to a shape and design, the procedure can begin.
On the market, there are more than 10 methods an artist may use, including the powdery filling technique, soft hair stroke technique, soft fill technique, soft shading technique, full created hair stroke technique, feathering technique, 3D eyebrow technique or the SoftTap® technique.
During most of these procedures, the artist will numb your eyebrows by using a needle and will apply a template, drawing in your eyebrows. Shaping alone can take up to 30 minutes, depending on the complexity. Then, mixing different colors to create the desired shade, the artist will create tiny hair-like strokes to make the eyebrows appear as if they are thicker, either using a tattoo gun or a special hand guided tool.
The procedure can take one to three hours, depending on the complexity of the job.
What are the extra costs?
In some cases, the artist may charge a separate fee for the antiseptic or topical anesthetic.
Eyebrow tattoos, even though they may appear permanent, will not last forever, meaning touch-ups will be required every so often, usually every one or two years. Touch-ups will often cost less than $250, depending on the factors mentioned prior.
A tip, while optional, is often expected. This can be 10 to 20 percent on top of the estimate.
Similar to a tattoo, the area, after the procedure has been performed, must be cleaned and moisturized to prevent an infection. These aftercare products may or may not be included in your original estimate. If not, these products can cost an additional $5 to $10.
Tips to know:
Before choosing an artist, always take a look at their portfolio to see if the results are something you’re envisioning. Also, make sure you check out their reviews online to see what previous customers are saying and visit the salon in person to check the cleanliness.
A good artist, when you choose one, should be accredited by either a reputable organization and/or official association. Before booking, also make sure they are insured to protect you both.
As for pain, people report varying pain reports. Some say the pain is similar to that of a traditional tattoo, but near the eye, whereas others stats the procedure encountered no pain at all.
On BondenAvant.com, she posted some before and after pictures.
How can I save money?
Check out Groupon to see if any reputable artists in your area are offering discounted daily deals. For example, at the time of this writing, we were able to find highly credible studios for up to 50 percent off.
How Much Does a Hymenectomy Cost?
A hymenectomy is a surgical procedure for an imperforate hymen, which causes obstruction in the vaginal opening. The surgery involves either completely removing the hymen or increasing the hymen opening in the process, most often due to a malformation of the hymen.
A hymenectomy is typically performed on patients with a hymen that is so thick that penetration, even with something as small as a tampon, is extremely painful and nearly impossible.
How much does a hymenectomy cost?
Noted as a minor surgery, the cost of a hymenectomy is typically around $1,000 to as much as $10,000 without insurance. If done in an outpatient center, the costs will be a lot less compared to being done in a hospital. The costs will depend on the surgeon fees, anesthesiologist fees, the facility, your geographical location and any pre-op/post-op testing/office visits.
As long as it the procedure is deemed medically necessary, then you should be responsible for your deductible and co-pays with your health insurance. Talk with your health insurance company to see what you would be responsible for before the procedure starts to know the policy limitations and which facility is under your insurance company’s network.
Hymenectomy overview
A hymenectomy procedure is done under a local anesthetic, either via a pill or via an injection. If the procedure is for an imperforate hymen, then the hymen will be opened near the center with scissors to cut away at the tissue. The area will then be sutured with absorbable sutures to help prevent bleeding. As for a circular hymen, the hymen is cut away and sutured as well.
The procedure can take 20 minutes to an hour, depending on the surgeon and the severity of the condition, and the recovery period can last anywhere from one to two weeks. You may be asked to stay up to one to two hours after the procedure in a recovery room.
Follow-up appointments with your gynecologist are necessary since the area needs to be monitored to ensure if it is recovering as according to plan. Complete healing usually occurs after six months, on average.
What are the extra costs?
Prior to the surgery, tests may be performed to determine your overall health and confirm the diagnosis. The tests may include a Pap smear and/or a pelvic exam, x-rays and/or blood work.
Prescription medication for pain and to help prevent an infection will be prescribed after the surgery. Estrogen cream is typically used to help aid in the recovery process.
Tips to know:
Before the procedure, let your doctor know of any allergies, particularly to medications, including over-the-counter, prescription, steroids, creams, eye drops, and herbs. Patients are usually advised to avoid taking aspirin and other blood thinners a week prior to the surgery. Additionally, eating or drinking anything eight hours before the procedure is not advised. Always talk to your doctor about instructions before the day of surgery.
A hymenectomy, as long as it’s successful, will ease the pain that can be felt during sexual intercourse or with any sort of penetration in general. Also, the number of urinary tract infections can greatly decrease or even be eliminated.
How can I save money?
If at all possible, have the procedure done by a professional in an ambulatory outpatient surgery facility. The costs are usually lower in these environments than in hospitals since there is no need to pay for hospital equipment and accommodation.
If you have insurance, some or all of the cost will most likely be covered by your insurance provider as long as the procedure is deemed medically necessary. Be sure to talk with your provider before scheduling a surgery to make sure the center and your doctor are in network. If you want to switch your policy or see what is out there, consider browsing hundreds of policies for free at eHealthInsurance.com.
How Much Does a Lyme Disease Test Cost?
Lyme disease is the most common tick-borne disease in the United States, with almost 25,000 cases confirmed in 2011.
This disease can cause aching muscles, fatigue and/or joint pain, and in most scenarios, a Lyme disease blood test won’t be necessary.
How much does a Lyme disease test cost?
In most cases, if there’s a clear sign of Lyme disease — a painless rash spreading, similar to that of a bullseye — then your doctor often won’t recommend a test unless you were in an area known for Lyme disease. Instead, your doctor will recommend antibiotics, which, even if you don’t have insurance, should cost less than $30 at your local pharmacy.
The antibody blood tests, the most commonly used tests, if you were to want one and/or your doctor recommends it, then a simple Lyme disease test can cost close to $250 without insurance, in addition to the doctor’s visit. This cost will really depend on the type of Lyme disease blood test you want. Again, your doctor, after performing a thorough physical exam and examining your medical history, will recommend the blood test if you were in an area known for ticks with Lyme disease and/or have symptoms such as a fever, swelling in your joints and/or warmth in the knees, shoulders or wrists.
| Type of Test | Description | Average Cost (without insurance) |
|---|---|---|
| Enzyme-linked immunosorbent assay (ELISA) | This is the most common and sensitive test used to identify Lyme disease antibodies | $150 + doctor's visit |
| Western blot test | This test can also identify Lyme disease and will often be used to confirm the results of the ELISA test. | $125 + doctor's visit |
| Basic Lyme disease panel | $250 + doctor's visit | |
| Complete co-infection panel | $700 + doctor's visit |
According to this message thread on MetaFilter.com, a few members talked about what a Lyme disease test could cost, and most expected the total costs would be in the $300 to $700 range, with one member claiming he paid $700 for his son without health insurance.
The cost of an IGeneX Lyme disease test, for example, can cost $250 to $660, according to LymeDiseaseGuide.net.
Lyme disease test overview
A Lyme disease test will detect antibodies to the Lyme disease bacteria Borrelia burgdorferi in the blood, according to WebMD.com.
An antibody test can either be drawn from the fluid within the spine or joints, or it can be via a simple blood test; however, if your blood is drawn, it can take up to two months after becoming infected before the antibodies are detected. Once these antibodies form, they can stay in your system for years, even after a treatment plan is developed.
An antibody test often starts with the ELISA test, as mentioned in the table above and recommended by the CDC, followed by the Western blot test to confirm the positive results of an ELISA test. Both of these tests work in the same way as that of a blood test. At your local doctor’s office or lab, a blood sample is drawn from your upper arm and sent off for analysis.
Test results are readily available within one to two weeks.
What are the extra costs?
The doctor’s visit to discuss the possibility of having the disease could cost $150 to $250 without any health insurance.
A polymerase chain reaction (PCR) test can detect the genetic material of the Lyme disease bacteria, and in some cases, it may be used to identify a current infection if a doctor suspects you have the symptoms of Lyme disease and/or you didn’t get better with a round of antibiotics.
Tips to know:
The blood tests, as per ChoosingWisely.org, can trigger false positives, suggesting you have the disease, even though you really don’t. This scenario, if it were to happen, could lead to an unnecessary treatment plan with antibiotics that could cause extreme side effects. Aside from these negative results, it could also hurt your pocketbook, seeing you would need additional x-rays, urine tests, additional blood tests and doctor follow-up visits. The CDC, however, states the ELISA, EIA and IFA tests have a very good sensitivity rate several weeks after the infection.
Risks are very minimal, but in some circumstances, you may see a small bruise at the blood draw site, or in rare cases, the vein may swell.
According to the CDC, the chances you have Lyme disease will depend on the type of tick, where you acquired it and how long it has been attached to you. In the United States, many types of ticks bite people, but only the blacklegged ticks, which need to be attached to your skin for at least 24 hours, transmit the bacteria that causes Lyme disease.
How can I save money?
If the Lyme disease test is performed at a local doctor’s office, it’s often covered by your health insurance and you will only be responsible for your co-pay and deductible as long as it’s deemed medically necessary. However, if you were to order an online lab test, it won’t be covered by insurance, so it’s best to talk to your insurance company ahead of time to know the policy and what’s covered.
How Much Does Cypress Lumber Cost?
Cypress lumber, the wood that comes from the cypress tree, is known for its scalelike leaves and woody cones. But did you also know that aside from its appearance, cypress is also valued for its wood?
Its wood is also known for its aesthetic appeal as well as its durability.
Cypress wood is popularly used for trim, cabinets, countertops, flooring, paneling and even siding.
How much does cypress lumber cost?
On average, the cost of rough sawn cypress lumber can be around $2 to $6 per board foot at your local lumberyard/retailer.
Pecky cypress wood, which is caused by the fungus that occurs with older cypress trees, can cost close to $4 per linear foot.
The costs will depend on the size, type and where it’s purchased from. Refer to our table below to see the average prices commonly charged:
| Size | Board Foot Estimate for Rough Sawn Cypress Wood |
|---|---|
| 1" X 4" | $2 |
| 1" X 8" | $2 |
| 1" X 12" | $2.50 |
| 2" X 4" | $2 |
| 2" X 8" | $2 |
| 2" X 12" | $2.50 |
| 3" X 6" | $2 |
| 4" X 4" | $2 |
| 6" X 6" | $2 |
| 8" X 8" | $2.50 |
Woodworkerssource.com, for example, charges around $6 to $9 per foot, according to their official pricing sheet.
Cypress Wood and Lumber, located in Lousiana, charges $2.35 per board for cypress No.2 or $4.60 per square foot for six-inch wide cypress beveled siding, according to their official website.
What are the extra costs?
Air dried or kiln dried cypress wood can cost 20 to 60 percent more than the estimates mentioned prior.
Local lumber yards can deliver your purchase for a small fee, usually no more than $50 to $100; however, the fee may be waived if you meet a minimum spending requirement.
Because this lumber comes in pre-cut sizes, just like any other lumber pieces found, you may need to have the lumber cut to your specifications. Some hardware stores may provide this service for free while others may charge a small fee.
Tips to know
Cypress lumber, at a local lumber yard/retailer, usually ranges up to 48 inches in width and lengths of 7 to 16 feet, with the average lengths being 12, 14 and 16.
The cypress is considered any of the various evergreen trees or shrubs of the genus Cupressus, which is native to North America.
Due to the slower growth, the rings of the wood tend to be closer together. This decreased shrinkage allows the board to be more energy efficient since it provides more insulation.
This type of lumber is ideal for outdoor use, such as siding, outdoor furniture or decking.
It’s a great insect repellant and requires very little maintenance. Compared to most types of wood, it is very easy to paint and stain.
This type of tree is often found in the swampy areas of the Eastern coast. Known as a water-loving tree, the average tree can reach up to 150 feet tall. Common names can include yellow cypress, tidewater cypress, white cypress, gulf cypress, black cypress and more.
Some types of cypress will have more knots than others. If you are using cypress lumber for a project that requires support and stability, then you should choose the purest cypress available.
Cypress has a natural preservative oil known as “cypressene,” which offers a moderate resistance to insects and decay.
Cypress is a very versatile, coming in a variety of shades, colors, and purities, meaning it can match almost any style or color scheme.
When shopping for cypress wood, you may see the term, “sinker.” According to the Woodworking Network, this simply means a bacterial infection occurred in the living tree, which, eventually increasing the water content, preventing the logs from floating, hence the name “sinker.” Sinker logs are commonly found in older trees and were often the largest log from the tree.
How can I save money?
By purchasing in bulk, the costs per board foot can go down.
How Much Does a Gyrocopter Cost?
The gyrocopter, or more formally known as the gyroplane, rotorcraft, or autogyro, is a type of rotorcraft usually built from a kit or from plans. It utilizes unpowered rotor blades that turn at several hundred RPM to produce a lift that can sustain flight. It also has an engine-driven propeller that moves the gyroplane forward.
Gyrocopters can be used to fly for fun, as an agricultural device (crop spray) or as a means to travel.
While the gyrocopter can be mistaken for a helicopter if seen from far away, these two aircraft work in very different ways.
With a helicopter, an engine causes the blades to spin and create the lift. With a gyrocopter, the engine propels the craft forward, and the air flow created by this movement forces the blades to spin and create lift. The good part about this is that even if the engine fails, the blades will continue to rotate because of momentum, and the craft will slowly descend for a safe landing.
How much does a gyrocopter cost?
The cost of gyrocopters depends on the manufacturer, the design, features, brand and where it’s purchased from. The costs can range from as little as $25,000 to more than $150,000.
We researched some of the most popular makes and models and included the average price inside our table below:
| Make/Model | Average Price |
|---|---|
| ABS AeroLight Xenon Ultralight Gyrocopter | $83,000 |
| Aerotek ELA G8 Cruser | $60,000 |
| Aerotek ELA G10 Eclipse | $92,000 |
| Aerotrek ELA G8 Ranger. | $58,000 |
| Airgyro Calidus | $90,000 |
| Airgyro Cavalon | $111,000 |
| Airgyro MTO | $66,000 |
| ArrowCopter AC20 | $160,000 base |
| AutoGyro GmBh Cavalon Gyrocopter | $80,000 |
| Sport Copter Lightning | $22,000 |
| Sport Copter Vortex M912 | $65,000 |
| Sportcopter II | $85,000 |
At Barnstormers.com, gyrocopters for sale by owners cost anywhere from $9,000 for a Dominator-style gyrocopter to as high as $125,000 for a 2012 Auto Gyro Cavalon, according to the classified ads active at the time of this writing.
According to the PRA.org, gyroplanes can be built from plans for less than $10,000 and about twice as much for single-place gyroplane kits.
Gyrocopter overview
Gyroplanes are usually built from kits, plans, or original designs. Many of the gyroplane kits come with seamless aluminum tubing as well as aluminum plates and fittings which are connected using aircraft-grade nuts, bolts and washers. Installation does not require welding. In the United States, gyroplanes are built directly from kits or plans and no companies produce ready-to-fly gyroplanes that are licensed to fly within the United States.
A single-seat is typically around 14 feet long and weighs around 500 pounds empty. Most cruise at 45 to 60 mph.
A quick build kit will usually comprise of standard and optional equipment. Standard equipment may include the following: all airframe components, control assembly, fuel pumps, an engine, electrical switches and breakers, fuel injection, integrated electronic flight information system, propeller, rotor blades, rotor brake assembly, rotor tachometer, a factory pre-built tail, and a throttle lock assembly. Optional equipment may include cabin doors with hardware, heater, and an oil cooler set. Time to build can range from 80 hours to 1,000 hours, depending on the specific make and model of the gyroplane.
What are the extra costs?
Complete gyroplane flight training is required to get an FAA gyroplane rating. Also, many gyroplane dealers require interested buyers to complete proper training from an approved facility before they can buy any gyroplane. Gyroplane flight training can cost about $1,500 to $3,000, depending on the class in which the student enrolls.
Individuals with no flying experience will need an average training period of 30 hours. Licensed pilots looking to convert will need to spend approximately 10 hours. At some schools, gyroplane training starts at $180 per hour with discounts provided to those who purchase hours in bulk.
Maintenance and operation of the gyroplane are a given. Some models may set users back about $500 for maintenance services needed after a specific number of hours.
If you are going to build your own gyrocopter, you may want to personalize it as well. There are certain decals and designs that you can get for the body of the aircraft in the same way that you can get decals made for your car. These will cost extra, but it can add a great dynamic to your gyrocopter.
Tips to know:
A pilot’s license is often required if the aircraft weighs less than 254 pounds. If it weighs more than that, a student’s pilot license is necessary.
Some gyrocopter manufacturers offer a stability augmentation kit that gives customers the alternative to enhance their gyro from being a single-bearing rotor head to a double-bearing unit.
Newer gyroplane models are equipped with safer aerodynamic stability designs and are less sensitive to turbulence compared to airplanes and helicopters.
When it comes to life expectancy, a gyrocopter has a practically unlimited lifespan. Depending on the manufacturer, the rotor, engine and propeller will have a varied lifespan. Generally, the time between overhauls for engines typically varies between 1,000 and 2,000 hours.
How can I save money?
Check for discounts offered for gyroplane flight training if you were to need it. Most schools offer discounted rates to those who purchase flight training hours in bulk.
Collect a list of the models and prices offered for gyrocopter kits. With the help of an instructor, choose a kit that best suits your budget and your skills.
Building the kit yourself will be cheaper than purchasing one that is already built. Purchasing a used model will be the cheapest option.
How Much Does it Cost to Paint an RV?
Painting an RV can be a costly decision for many, and when it comes to painting, it’s usually done on older models that need to look new again.
How much does it cost to paint an RV?
On average, the overall cost of a two to four color exterior paint job on an RV is going to cost anywhere from as little as $5,000 to as much as $15,000 for a standard RV longer than 30 feet, and the costs will depend on the length of the RV, the type of paint being used, the geographical location and the professional contractor you’re using. While these prices may seem high, most of the costs will be due to the intensive prep work involved.
We scoured the web and found multiple quotes RV owners received when looking to re-paint their current RV. These prices, which varied quite a bit, were included in the table below:
| Type of Job | Price Quoted |
|---|---|
| The skirt only on a 32-foot Winnebago | $300 |
| 35' motorhome | $13,500 |
| 33' motorhome | $10,000 for a three color paint job |
| 37' motorhome | $8,500 |
| 33' motorhome | $14,000, which included sanding down to the metal, primer and final paint job |
| 32' motorhome | $5,500 wet sanded, buffed and one clear coat |
| 36' motorhome | $11,000 for prep, sanding and five colors |
| 35' class A motorhome | $9,000 |
| Class B RV | $2,000 |
According to one person who shared his opinion on this forum thread at RVForum.net, the average cost to paint an RV is around $8,000 to $10,000 for a professional job.
On this MotorhomeMagazine.com forum thread, a member said he had paid $11,200 to have his 36-foot coach painted. This estimate included a five-color paint with four coats of Dupont Chroma Premier.
Painting an RV overview
The estimates above should include the surface preparation, such as scraping, pressure washing, covering woodwork, outlets, and floor surfaces, protecting the customer’s property and removing any external hardware.
Before the job starts, the RV will be sanded, primed and then coated with up to three to five coats of paint, on average. This paint will then be covered with a finish coat to protect the paint and provide that new-paint “shine.” Depending on the professional, they may also reseal with new weather stripping, changing the exterior vent covers and/or repaint additional accessories.
What are the extra costs?
A multiple-color painting job can increase the estimate by more than 20 percent.
If a custom design is required, additional fees can apply. Custom designs can include specific color schemes, designs, such as shapes or stripes, and/or even pictures.
Slideouts are often not included in the estimate and can be an additional cost to budget for.
Tips to know:
Most often, paint fades due to sunlight, pollution, salt, and/or abrasive cleaners, but there is no scientific evidence to prove that certain paint colors fade faster than others.
How can I save money?
Consider fiberglass instead of a paint job. Fiberglass will not absorb heat in the summer, its finishes are more resistant and is much cheaper, allowing you to save as much as $5,000 when compared to a paint job, according to DoitYourself.com.
Limit your graphics and customized finishes. Not only will a customized job cost you more, it can cost you even more in the future if it were to scratch or become damaged since the entire portion would have to be repainted again.
As with limiting your graphics and customized finishes, it’s wise to limit your colors as well. The more colors you add to a job, the more it can increase the costs.
Weigh the pros and cons of painting an RV. Most of the time, the investment won’t be worth it since it won’t add much in terms of retail value. 99 percent of the time, you won’t be able to recoup your costs. Instead of spending close to $10,000 on a paint job, it may make sense to save the $10,000 and trade your RV into a local dealer.
How Much Does RV Detailing Cost?
RV detailing, just like car detailing, will make your RV look like new again.
Whether it’s a simple wash and wax or a deep clean from the exterior to the interior, an experienced detailer will have the skills and knowledge to make your RV look as if it just rolled off the dealer’s lot.
How much does RV detailing cost?
On average, most companies are going to charge by the foot, and depending on the size of the RV, the type of RV and the amount of cleaning needed, the costs of RV detailing can range anywhere from $3 for an exterior wash to more $20 per foot for an interior and exterior job. The more work that has to be done, just like car detailing, the more you will have to pay, so it can be hard to offer an exact estimate. Refer to our table below to see what a package may cost you.
| What's Included | Average Quote |
|---|---|
| - High pressure wash with wax - Wax - Hand dry - Cleaning outside windows - Clean and protect tires | $3 to $6 per foot |
| Everything above, plus: - Wash rooftop with UV protectant - Detailed wheel clean, including rims and wheel well | $5 to $8 per foot |
| Everything above, plus: - Vacuuming and shampooing interior carpets - Dusting interior - Cleaning all areas of interior in depth - Clean vents - Shampoo all furniture - Clean out the exterior compartments | $12 to $16 per foot |
| A wash and wax ONLY | $10 to $13 per foot, depending on the condition of the gel coat |
NOTE: A mobile service could be double, if not triple the costs mentioned above.
South Central Storage, a detailer based in Pennslyvania, for instance, lists its prices on its official website. A basic exterior package starts at $3 per linear foot, while a full detail, including the interior and exterior, starts at $17 per linear foot.
OrlandosDetailer.com offers three packages, with the pro RV detail package starting at $5 per foot, while the “Orlando’s Finest” starting at $20 per foot.
What are the extra costs?
Depending on what’s included in the detailer’s package, surcharges may apply for certain services. For example, buffing, compounding and sanding can be added to most packages for a few extra dollars per foot. Oxidation removal can be within the same price range as well.
If any repairs were required, such as repairing the fiberglass and/or gel coat, then this could be an additional cost to budget for.
A roof cleaning may or may not be included in the estimate. If not, this can be an additional charge to consider, often another $1 to $3 per foot.
Scratch removal, if the detailer is able to remove it, can be removed for a small fee. Depending on the size of the scratch, this could be an additional $25 per scratch, on average.
Slide outs on a fifth wheel, again, may or may not be included in the estimate. If it isn’t, this could be an additional $25 to $50 per slide out.
Depending on the detailer’s policy, an RV in poor condition could lead to an additional surcharge.
Tips to know:
Detailers will always have a minimum charge, usually ranging anywhere from $50 to $300.
How can I save money?
Most detailers are often able to offer you an estimate over the phone or may include the quotes on their official website. Try to gather as many quotes as you can before settling on a provider, but don’t focus solely on the price. Be sure to look at reviews online and pictures of past work to ensure it’s a provider worth the price.
How Much Does Rock Excavation Cost?
| Need a pro near you? Get multiple quotes for free online. Get your quote now >> |
When it comes to excavating rock, blasting, ripping and break have been the most popular methods usedas part of construction engineering for years.
It is done primarily to create solid foundations for structures such as skyscrapers, dams, and some houses. It may also refer remove undesirable rocks from a certain area.
How much does rock excavation cost?
Depending on the type of rock, the size of the job, placement, contractor rates, the equipment being used, and geographical location, most rock excavation jobs will cost $5 to $35 per cubic yard if a blasting method is used, but this price could be much higher if it were a public bid job. Because all jobs will be so unique, highly consider a free quote service such as HomeAdvisor.com. Here, you can describe your job and local, licensed contractors will contact you with bids.
Based on a forum thread on eng-tips.com, the average cost of rock excavation is around $5 to $15 per cubic yard if the contractor is able to drill and complete the blast.
In Louisville, Kentucky, they received bids from five different contractors, with rock excavation quotes ranging anywhere from $60 per cubic yard by blasting to as much as $125 per cubic yard by mechanical means.
Rock excavation overview
The method used during the rock excavation process will greatly depend on the rock mass and how close the rocks are to a populated area. Rock blasting, a popular method used, involves drilling smaller holes inside of rock, followed by inserting an explosive-type device inside. For smaller rocks, a jackhammer may be used to break up the compressed rock. If the area is populated or blasting isn’t allowed, then a process known as chemical rock fissuring may be employed.
What are the extra costs?
Depending on the contractor and the quote receive, excavation is often considered a one-step process. The land, if it needed to be cleared or graded, is often considered a separate charge.
In the case of a larger job, permits may be required, especially if a blasting method is used.
How can I save money?
As with any project, try to receive as many quotes as possible before proceeding, but don’t focus solely on the price. Be sure to look at the reviews, their reputation and what kind of work they have done in the past.
How Much Does a Japanese Maple Tree Cost?
The Japanese Maple could be the most desirable garden tree.
With a variety of tree shapes, forms and colors, it’s bound to turn heads during the fall months when the leaves change into red or green colors.
How much does a Japanese Maple tree cost?
The cost of a Japanese Maple will depend on the exact variety, its size and where you purchase it from. As you can see in our table below, the costs can range from as little as $25 for a one-gallon container to as much as $1,000+ for an eight-foot tree. With upwards of 330 cultivars of this species and various price points, refer to our table below to see what it may cost:
| Variety | Average Price |
|---|---|
| Aratama Japanese Maple | - $90 for 2-gallon tree |
| Bloodgood Japanese Maple | - $40 for 3-gallon - $85 for 2-3 foot tree - $105 for 3-4 foot tree - $400 for 6-foot tree - $700 for 8-foot tree - $1,100 for 10-foot tree |
| Bonfire Japanese Maple | - $90 for 2-gallon tree |
| Boskoop Glory Japanese Maple | - $90 for 2-gallon tree |
| Burgandy Lace Japanese Maple | - $60 for 4-foot tree - $125 for 6-foot tree - $750 for 9-foot tree |
| Butterfly Japanese Maple | - $75 for 2-3 foot tree - $95 for 3-4 foot tree |
| Coral Bark Japanese Maple | - $75 for 2-3 foot tree - $95 for 3-4 foot tree - $125 for 4-5 foot tree - $600 for 8-foot tree |
| Crimson Queen Japanese Maple | - $30 for 1-2 foot tree - $80 for 2-3 foot tree - $140 for 4-5 foot tree |
| Ed Wood Full Moon Japanese Maple | - $70 for 2-3 foot tree - $100 for 3-4 foot tree |
| Emperor Japanese Maple | - $85 for 2-3 foot tree - $100 for 3-4 foot tree |
| Ever Red Japanese Maple | - $40 for 3-gallon tree |
| Fireglow Japanese Maple | - $200 for 7-foot tree |
| Garnet Japanese Maple | - $40 for 3-gallon tree |
| Green Cascade Japanese Maple | - $90 for 2-gallon tree |
| Kiyohime Japanese Maple | - $100 for 2-3 foot tree |
| Koto No Ito Japanese Maple | - $90 for 2-3 foot tree |
| Lace Leaf Japanese Maple | - $85 for 5-gallon tree |
| Lion’s Head Japanese Maple | - $40 for 1-gallon - $80 for 2-3 foot tree - $100 for 3-4 foot tree |
| Mikawa Yatsubusa Japanese Maple | - $90 for 1-2 foot tree |
| Moonfire Japanese Maple | - $150 for 5-gallon tree |
| Orangeola Japanese Maple | - $80 for 2-3 foot tree |
| Osakazuki Japanese Maple | - $115 for 3-4 foot tree |
| Purple Ghost Japanese Maple | - $150 for 3-4 foot tree |
| Red Japanese Maple | - $25 for 1-gallon |
| Red Select Japanese Maple | - $40 for 3-gallon tree |
| Ryusen Japanese Maple | - $80 for 3-4 foot tree |
| Seiryu Japanese Maple | - $80 for 4-5 foot tree |
| Shaina Japanese Maple | - $80 for 3-gallon tree |
| Sherwood Flame Japanese Maple | - $50 for 1-gallon tree |
| Shishigashira Lions Head Japanese Maple | - $40 for 1-gallon tree - $80 for 2-3 foot tree - $100 for 3-4 foot tree |
| Shishigashira Lions Head Japanese Maple | - $40 for 1-gallon - $80 for 2-3 foot tree - $100 for 3-4 foot tree |
| Tamukeyama Japanese Maple | - $85 for 2-3 foot tree |
| Viridis Japanese Maple | - $40 for 3-gallon tree |
At Lowe’s, for example, a 3.25-gallon red Japanese Maple tree retails for a pinch more than $20.
On Amazon.com, a few highly rated trees range from $30 for a one to two foot tall Japanese Red Maple to $35+ for a floating cloud Japanese Maple.
Japanese Maple seeds, depending on the variety, are often $2 to $4 per 20 pack.
Japanese Maple tree overview
With more than one thousand different varieties, most are quite similar, while rarer species can be appealing to collectors. The major areas of differences will include the leaf form, which can range from a larger-than-average leaf to a smaller leaf divided in sizes; the leaf color; branch arrangement, where some may be upright, similar to a regular tree, while others have horizontal branches, creating a lower sitting tree; and the overall size, ranging from as tall as 25 feet to as little as a shrub, only a few feet tall.
Depending on the variety, some can grow into in a small tree, similar to that of a shrub, or as tall as 20 feet. They may be cascading, upright or pendulous in form, with most varieties producing a green or red leaf during the fall and a wide variety of colors during the spring.
They can be grown inside of a container when small, in a garden or just like any other tree in your yard. Compared with other trees, they tend to have fewer pests and diseases, making them a versatile choice.
What are the extra costs?
If planting on your own, it’s essential to prep the soil before planting to ensure it grows at a healthy rate. Whatever soil you may be using, always make sure you’re using a generous amount of organic material such as a garden compost or manure at three inches thick to encourage root growth. If you want to plant inside of a container, then be sure enough drainage holes exist to stop the flooding from killing the trees as overwatering can do damage. Every month, after the tree has been planted, it should be fed with a liquid fertilizer. Japanese Maples require afternoon shade, especially when young, protection from stronger winds, well-drained soild and protection from frost, according to Wayside Gardens.
Many nurseries may charge a delivery fee, especially if you don’t meet the spending minimum. Delivery charges commonly start at $50 and increase from there, depending on the distance traveled.
If you need a landscaper to plant the tree, the average job could cost $50 to $100 per tree, but it can drop “per tree” if more than one tree needs to be planted. If you did want to hire a landscaper to plant a tree for you, consider getting multiple quotes for free from HomeAdvisor.com.
Tips to know:
Depending on the variety, most Japanese Maple trees will work best in cooler areas with minimal afternoon soon. Refer to the care guide to know exactly which environment the tree will thrive in.
Most Japanese Maple trees won’t need to be staked unless it’s a cascading form.
The autumn months, at least one month before the first frost, will be the best time to plant your Japanese Maple to encourage root growth.
