How Much Do Sunflowers Cost?
The sunflower is an annual flower, native to America.
The name “sunflower” was an easy pick since the flower greatly resembles the sun.
Sunflowers are known to symbols of radiance and longevity.
How much do sunflowers cost?
Usually, the cost of one sunflower will range anywhere from $1 to about $4.50 per stem. However, the more you purchase at once in bulk, the more you are going to be able to save per stem.
For instance, at Wholeblossoms.com, the prices for 25 stems are $80, while 300 stems cost as much as $450.
At Sam’s Club, the costs can average anywhere from $0.65 per stem if you were to purchase 100 to as much as $1.25 each for 40 stems.
Those who want to purchase the seeds should expect to pay around $1 to $6 per packet of 100 seeds.
For example, at Amazon.com, sunflower seeds can cost $1.29 to $5.20 per packet.
A bouquet purchased from a local florist can cost around $35 to $70 depending on what is in the bouquet or centerpiece. This price will usually include a vase and a variety of other flowers.
For a wedding, most couples reported paying close to $3 per stem at a wholesale price.
| Quantity/Size | Price per Stem |
|---|---|
| 25 Extra Large Stems | $4 |
| 25 Large Stems | $3 |
| 30 Medium Stems | $2.50 |
| 40 Extra Large Stems | $2.50 |
| 50 Large Stems | $1.75 |
| 60 Medium Stems | $1.50 |
| 75 Large Stems | $1.65 |
| 80 Extra Large Stems | $2.50 |
| 100 Large Stems | $1.50 |
| 120 Medium Stems | $1.25 |
| 250 Large Stems | $1.50 |
| 250 Medium Stems | $1 |
Sunflowers overview
Sunflowers can be purchased as either an adult plant or in seed form. Sunflowers can come in different sizes such as mini, small, medium, large, and giant.
Some seed packets contain certified organic sunflower seeds grown in the USA for more than 20 years and have been cultivated to be free from chemicals, pesticides, and genetically modified organisms. Some brands have also been tested to ensure good germination rates and to meet standards set by federal regulations.
There are sunflower varieties that can grow from 10 to 14 feet tall, with blooms spanning 12 to 14 inches, while some sunflower types are cultivated for their colors and use in a bouquet.
Colors can range from yellow, which is the most common, to red and brown, two-tone red and yellow, and just about every shade of yellow.
What are the extra costs?
Buying sunflowers online, whatever their state may be, usually entails shipping charges. As an example, shipping and handling via first class mail for orders up to $10 can incur a shipping fee of $3.95 while orders of more than $150 can entail fees of 10 percent of the order total.
When growing sunflowers, fertilizer and soil mix may also be needed to help with their growth. There are numerous products made available online or at home depot stores. The prices will usually depend on the type of fertilizer or mix as well as the size and quantity.
Tips to know:
When buying sunflower bouquets, make sure to use clean fresh water when arranging the flowers using the flower preservative that usually comes with the order. Follow the instructions on the recommended dosage. Too much preservative can be disadvantageous since the flowers can be sensitive to sugar.
Remember that sunflowers need a lot of sun to grow properly. They also grow toward the sun, so this needs to be considered when trying to plant the flowers.
Feeding and watering of the sunflowers need to be done regularly. Avoid pouring fertilizer onto the stems to prevent decomposition. Organic fertilizer, like accurately diluted fish emulsion, or other liquid organic fertilizers can be used. If you have a dog, you can simply use its manure to fertilize the plants.
Heavy winds can cause the sunflowers to fall down and have their roots ripped out. If you live in an area with high winds, you may want to rethink planting sunflowers.
Farms can provide year-round sunflowers but some colors or varieties may not always be available.
How can I save money?
Some sunflower suppliers offer free shipping with minimum orders. Take advantage of this offer to avoid shipment charges.
Buy sunflowers in bulk at wholesale dealers and get considerable savings as a result of the discounted prices they offer.
Check out your local farmers markets as this is the best place to find the freshest and sometimes cheapest bouquets.
How Much Does a Purge Valve Replacement Cost?
The canister purge valve is responsible for storing fuel vapors inside of a containment canister as it recycles it back into the engine combustion process when necessary.
Located in the vacuum line between the fuel vapor containment canister and the intake manifold, this part can either be controlled electronically or can be vacuum operated, which allows it to open at the appropriate time to allow these vapors, stored inside of the container, to be drawn into the intake manifold and then burned as part of the combustion process. Most of your newer models, however, will be controlled and monitored by a computer.
How much does a canister purge valve replacement cost?
On average, a purge valve replacement can cost anywhere from $125 to $225 if you were to hire a professional mechanic. The parts, depending on the car you drive, can be priced between $65 to 125, while the labor, which takes less than an hour to complete, will be anywhere from $40 to $85.
For example, on Amazon.com, the best selling canister purge valve parts can retail for about $20 to $50.
On this Audizine.com forum thread, a member was quoted $210 at a local Audi dealer, while another member said he was quoted $120.
Refer to our table below to see what it may cost for a particular make and model:
| Car's Make/Model | Price Average (parts+repair) |
|---|---|
| Ford Escape | $155 to $210 |
| Ford Focus | $115 to $175 |
| Hyundai Accent | $125 to $225 |
| Hyundai Santa Fe | $135 to $175 |
| VW Jetta | $120 to $175 |
Canister purge valve replacement overview
To confirm the part is, indeed, faulty, the mechanic will first want to look at the engine’s fault codes. If your engine light has illuminated and the fault code matches the diagnosis, then he or she will visually check the canister purge line to test the flow and seal.
During the repair, depending on the car you drive, the canister purge valve will first be located. In most case, it will be either near the intake manifold or the engine compartment. To access this part, other items blocking access will have to be removed in order to gain access to it. Once accessed, the part will be taken off its mount and the hoses will be disconnected. The new valve will then be replaced, followed by attaching the hoses and electrical connectors in reverse order. When done, the car will be inspected again and turned on to test the new parts performance.
The whole process should take less than 45 minutes.
What are the extra costs?
The hoses and/or electrical connector that is attached to the valves may need to be replaced if faulty or in need of repair. These parts often won’t be included in the estimates we mentioned above.
Tips to know
To know if the part went bad, there are a few things to look out for. For starters, the most common symptom will be an illuminated “check engine” light, triggered by the appropriate fault code. Usually, no engine symptoms will be noticed while driving, but in some cases, black smoke may emit from the exhaust. Other common symptoms, according to YourMechanic, may include an engine that refuses to turn over right after refueling or an engine that idling rough.
In most cases, you can drive a car with a faulty canister purge valve, but if you notice black smoke coming from the exhaust, this can damage the catalytic converter due to raw fuel entering the intake system.
How can I save money?
If your check engine light is on, go to a local AutoZone to have them scan your code for free. From there, you can research the code in depth to see what the repair should cost you.
Talk with at least three mechanics in your area. If you know for sure this is, indeed, the issue, then most mechanics should be able to offer you a ballpark estimate over the phone.
If your car is still under warranty, refer to your warranty paperwork to see if the part will be covered. In most cases, you will only be responsible for your warranty’s deductible.
How Much Do Punctal Plugs Cost?
Punctal plugs are a tiny medical device that is inserted into the tear ducts to block the drainage.
Also referred to as a punctum plug or occluder, these devices are no larger than a small grain of rice.
How much do punctal plugs cost?
The cost of punctal plugs will depend on the doctor you go to, the type of punctal plug, where you live and if insurance is involved. On average, punctal plugs will cost anywhere from $350 to $650 without health insurance.
A member on this Vision Surgery Rehab Network forum thread said he was billed $480 to have temporary collagen punctal plugs inserted and this didn’t include the price of the permanent silicone plugs to be inserted in the future. The second appointment, even though he canceled it, would have been an additional $480, bringing the grand total to $960 without insurance. After his insurance kicked in, he was responsible for $96.
As long as the procedure is medically necessary, most major insurance companies will cover the procedure. In most cases, the insurance companies will request supportive documentation and medical records will be required to make a final decision. The Medicare allowance, for example, is said to be about $230 per eye or close to $530 for both eyes. With Medicare, they require a trial with collagen to assure the patient will benefit from the plugging, followed by an assessment to track the results. If the candidate benefits, then the permanent silicone plugs will be used.
For example, on this forum thread on HealthBoards.com, one member had paid $75 after her insurance paid. Another member on the same forum thread said she was billed $644; however, she was only responsible for her co-pay.
Punctal plugs overview
These plugs are often made of silicone, but temporary plugs, which dissolve over time, can be made of collagen and are designed to see if a patient can benefit from the plugging. In most cases, a doctor may want to try the collagen plugs first to see if you can benefit. A few weeks later, you will then come in for an assessment so the doctor can track your results. If they feel you do benefit from these plugs, then a permanent silicon plug will be used; however, as DryEyeZone.com claims, be forewarned with the term “permanent” since these plugs do have a high loss rate.
During the procedure, and depending on what type of plug is being used, your doctor may first use a specialized instrument in order to measure your tear duct size and the opening. This measurement will help determine how larger the plug needs to be in order to adequately block the channel and keep it in place. To help prepare, a local anesthetic may be used, but in most cases, it isn’t recommended, according to AllAboutVision.com. Next, the punctal plugs will be either inserted into the lower lid, upper lid or both. Available in different designs, most plugs will be squeezed into place using a variety of different tools.
Various types of punctal plugs exist on the market, including an umbrella, tapered, hollow, reservoir or slanted-like style. An umbrella design won’t disappear in the tear duct and can be removed if necessary. Tapered punctal plugs keep the plug in place by placing extra force horizontally. A hollow punctal plug will have a hollow interior to help the plugs adhere to the shape of your eye’s ducts. A reservoir type can capture and hold the tears, essentially reducing discomfort. Lastly, a slanted-like plug can help maintain comfort and stability.
What are the extra costs?
As mentioned, most doctors may want to test temporary plugs before inserting a permanent solution. All depending on the billing situation, this can, sometimes, increase the costs by more than double the estimates mentioned above. Be sure to talk with your doctor’s office to see what you will be responsible for.
Quite frequently, patients often find their plugs falling out, even though it’s considered a “permanent” solution. Again, depending on the situation, you may be required to pay additional fees for a doctor’s visit.
Over time, your plugs may cause discomfort and/or a reaction. In this situation, your eye doctor will simply flush the plugs out, effectively removing them, but he or she may charge a doctor office visitation fee.
Tips to know
Punctal plugs are often recommended when either non-prescription and/or prescription eye drops fail to help your dry eye condition. They can also be used after a LASIK procedure.
While rare, side effects may occur such as excessive tearing if the plugs do the job too well. You can also lose your plug over time and can occur for various reasons, such as rubbing your eyes excessively or dislodging the device. Infections, while rare, can also occur due to a rare reaction with the plugs. If this were the case, you would be treated with antibiotics or the plugs would be removed.
How Much Does it Cost to Subdivide Land?
Property owners often subdivide their land for a few reasons. Usually, it’s either to sell it off for a profit, increase the property value or divide the property among family.
There’s no “universal” process as it will vary from state to state and city to city. Subdividing land will be up to the local officials to approve the request, and generally, it will be based upon the location of the property, the local zoning laws, the property’s shape, what’s on the property and if it has access to local city services.
How much does it cost to subdivide land?
With no set standard, it can be so hard to offer an estimate on what it’s going to cost to subdivide land. The costs will all depend on the surveying costs, platting costs, local hearing fees, how many lots you want to create and if any improvements need to be made in order to legally subdivide the land.
Local fees, which can include a hearing fee, review fee, tax map updating fee and recording fee, alone can range from as little as $500 to more than $10,000, depending on where you live and, again, the number of lots you plan on creating. Don’t be surprised if your local city presents you with close to 10 fees you have to pay.
Aside from the local fees, also be prepared to pay a professional surveyor to survey the property. Depending on who you hire, the surveyor may charge either by the hour or as a flat fee. To budget properly, the average sized property, often less than 10 acres, can cost about $500 to $3,500.
For larger jobs, such as those who want to turn their land into a subdivision, the costs can be much higher since most local cities will require you to make improvements such as creating access to the local roads, sewers and utilities. With so many factors with improvements, the costs can range from $10,000 to more than $35,000+.
In the end, with all of the fees factored in, the costs of subdividing could range from as little as $20,000 to more than $50,000+
DLHowell, a civil engineering environmental land planning company based in Pennslyvania, created a handy table of fees, showing local residents what it may cost to subdivide land. In the end, they recommend budgeting $20,000 to $32,000+
According to a forum member on BiggerPockets.com, he said his one-acre property qualified to be broken into three lots. With his proposals, he had found it could cost close to $0,000 t complete the entire process.
Subdividing land
The first step to subdivide your land is by calling your local zoning/planning development and ask how you can start the process to subdivide your land. Some cities may have the information on its website, while others require you call. Regardless, you should be able to find information here to see if your property does qualify for a subdivide.
Next, you will need to hire a surveyor to survey the property to draw up what’s known as a “plat.” This is a map of the land they survey to identify your property boundaries, access right-of-ways, flood zones and easements. During this survey, they should be able to tell you if your property qualifies for the subdivide.
Lastly, you will submit your application, along with your plat mat, title and fees, to your local zoning board and await a response. Depending on your local city, they will then decide during a meeting or may go to a public hearing.
What are the extra costs?
Subdividing a piece of land can have many additional costs, especially if improvements need to be made. As mentioned, you may have to provide access to the local sewers or roads, which can increase the costs.
Also, if you were to hire a lawyer or needed to clear the site, additional costs could apply. The same could be said about inspector fees and/or permit fees, again, all depending upon your local city laws.
Tips to know:
Even if your local city claims your property isn’t eligible for subdividing, it doesn’t mean this is the answer set in stone. Consider talking with a local attorney who specializes in local zoning laws to see if you’re a good candidate for an appeal.
While it may seem like a pot of gold, larger projects are often best left to real estate developers as these projects can be much larger than the average homeowner can handle.
How can I save money?
Talk with your local city to see if they offer a surveying service. If so, this option is often cheaper than hiring a private company.
Ask yourself why you’re subdividing your land. Do you want to turn a profit? If so, are you going to sell after subdividing? Simply stated, you are creating more properties that can be sold to other people, but of course, if it were easy, more people would do it, so keep in mind that it is easier said than done.
How Much Do LeafGuard Gutters Cost?
| Need a pro near you? Get multiple quotes for free online. Get your quote now >> |
The LeafGuard Brand by Englert is known to be the world’s only one-piece seamless covered gutter system that attaches to your fascia board, not underneath the shingles.
This unique, patented system will draw the rainwater down and around the underside of its hood and into the gutter, detecting any debris while the gravity forces any water into the gutter.
How much do LeafGuard gutters cost per foot?
On average, the cost of LeafGuard gutters will depend on the length of your gutters, your home’s shape, gutter type, gutter conditions, number of stories, the number of downspouts and who you hire. From our research, it appears you should be prepared to spend anywhere between $30 to as much as $100+ per foot for labor and removing your old gutters, but we were able to find so many variables online. However, with so many factors to consider, it can be hard to offer an exact quote. For this very reason, we highly recommend gathering free quotes from HomeAdvisor.com. Here, you simply explain your job and licensed contractors in your area will email you no-obligation quotes.
We scoured the Internet and were able to find so many quotes people received. Again, since there’s such as large range, we will let the estimates in the table below offer you an idea of what you may pay:
| Job Description | Quoted They Received |
|---|---|
| 10 feet | $1,400 |
| 11 feet | $1,200 at Costco w/ two downspouts |
| 16 feet | $1,627 |
| 20 feet | $2,200 |
| 42 feet | $3,000 after discounts |
| 118 feet | $7,900 |
| 200 feet | $8,000 |
LeafGuard gutters overview
The estimates above should include the gutters, downspouts, hardware required and the labor.
The LeafGuard branded system uses .032 gauge aluminum and is attached every two feet with internal hanging brackets. As for the appearance, it does come in a wide variety of colors, allowing you to pick a style that complements your home.
Tips to know
In laboratory tests, LeafGuard was able to handle up to 32 inches of rainfall, which is three times the amount of the heaviest rainfall ever recorded by the U.S. Weather Bureau.
How can I save money?
Don’t accept the first quote you receive as many people were able to knock another 10 to 15 percent off their initial estimate. Whether it’s haggling or looking for a promotion code, there are many ways to save. Be prepared, however. If you were to have an official salesperson come out, many claim it’s very high pressure, often forcing you into a contract that day.
LeafGuard is just one of the many “gutter guards.” Be sure to compare other gutter guard brands as the prices can range from as little as $3 to $5 per foot for a DIY job to as much as $30+ per foot for a complex system.
How Much Does Lump Crab Meat Cost?
Lump crab meat, sometimes referred to as Backfin meat, is the extra large portions that are removed from the crab body, is highly valued for its soft, sweet, and delicate taste. Unlike the meat in the legs, this meat is from the heart of the body, which is very little in most blue crabs.
This type of crab meat is typically used to make crab cakes, salads and is often used by manufacturers of pre-made recipes.
How much does lump crab meat cost?
On average, plan on budgeting around $17 to $48 per pound. The cost will depend on where you buy it, where you live, how you buy it and the time of year.
Inside of a can, lump crab meat can cost about $3 to $6 per six-ounce can, depending on the retailer and where you purchase it.
At Walmart, for example, the Crown Prince lump meat brand retails for close to $4 per six-ounce can or less than $1 per ounce.
Amazon.com, on the other hand, offers lump crab meat in bulk. Its best seller, Miller’s Select lump crab meat, for instance, retails for about $2.75 per ounce.
On this ChowHound.com forum thread, the prices they had paid ranged anywhere from $28.99 per pound at a local seafood market in California to as little as $17 at the local Costco.
Lump crab meat overview
Fresh lump crab with either be pasteurized, sealed inside of a can, or if it’s fresh, it will be processed and stored inside of a plastic container. Fresh lump crab meat has a shelf life of about four to five days, but when pasteurized, however, it can be kept for several months as long as refrigerated.
Regardless of how it’s purchased, both fresh and pasteurized lump crab meat will already be cooked and ready to be used in any recipe.
There are two types of “lump” crab meat: jumbo lump and lump. Jumbo lump crab meat consists of the two larger muscles that are connected to the swimming fins of the crab, whereas lump crab meat is merely a blend of broken pieces of jumbo lump and special grade crab meat.
What are the extra costs?
Shipping is usually charged separately if purchased online since it has to be on your doorstep within 24 to 48 hours at most.
Tips to know:
This meat is regarded as one of the best crab meats due to its sweet taste and hearty texture.
Lump crab meat is white in color and will be the best choice when color is important in a recipe.
The health benefits of lump crab
Crab meat is very low in calories, making it a healthy addition to any diet.
Crab meat is also low in fat, making it heart healthy.
Omega-3 fatty acids, which can increase memory and decrease the risk of heart disease and cancer, can be found in large quantities of crab meat.
While a lot of seafood contains a high amount of mercury, crab meat does not pose this risk.
Crab is also a good source of vitamins A, C and the B vitamins, including B12, and minerals like zinc and copper. It is a source of selenium, which may be a means of preventing cancer.
Crab also has some chromium, which is considered a useful mineral if you have insulin resistance, as it may improve blood sugar metabolism.
How to cook lump crab meat
How can I save money?
According to most who often purchase lump crab meat, many recommend checking out local Sam’s Club and Costco for the best deals and taste.
How Much Does an Outboard Motor Cost?
An outboard motor is mounted outside the boat on the back and is different from an inboard boat motor, which is built into the body of the boat.
How much does an outboard motor cost?
On average, the cost of a new outboard motor can be as little as $900 to as much as $25,000 or more. With so many factors, take a look at the chart below to get a good idea what each type of motor is going to cost. All in all, the costs will depend on the brand, horsepower, condition and where you purchase it from.
| Horsepower (HP) | Price Range |
|---|---|
| 2.5 | $900 to $1,500 |
| 4 | $1,300 to $2,000 |
| 6 | $1,600 to $2,300 |
| 8 | $2,100 to $2,900 |
| 9.9 | $2,600 to $3,300 |
| 15 | $3,000 to $3,500 |
| 20 | $3,200 to $3,800 |
| 25 | $3,400 to $4,000 |
| 40 | $5,000 to $6,000 |
| 50 | $6,000 to $7,000 |
| 60 | $6,500 to $7,500 |
| 70 | $7,200 to $8,000 |
| 75 | $7,300 to $8,300 |
| 90 | $8,200 to $9,200 |
| 115 | $9,100 to $10,100 |
| 150 | $10,300 to $12,100 |
| 175 | $11,000 to $13,500 |
| 200 | $14,500 to $17,500 |
| 225 | $16,700 to $19,500 |
| 250 | $17,900 to $20,000 |
| 300 | $20,000 to $23,000 |
| 350 | $21,000 to $25,000 |
NOTE: This chart is just for the horsepower only. This does not factor in the brand, starting system, year, length and/or weight. These are just price ranges you may pay at a local retailer.
This table refers to the most popular brands, along with the average price paid for select motors:
| Brand | Average Cost |
|---|---|
| Evinrude | - 2.5 HP: $1,100 - 15 HP: $4,000 - 25 HP: $4,000 - 40 HP: $6,000 - 60 HP: $7,800 - 90 HP: $10,000 - 115 HP: $11,500 - 150 HP: $14,000 - 200 HP: $18,000 - 250 HP: $22,000 |
| Honda | - 2.5 HP: $1,100 - 15 HP: $4,000 - 25 HP: $4,000 - 40 HP: $6,000 - 60 HP: $7,800 - 90 HP: $10,000 - 115 HP: $11,500 - 150 HP: $14,000 - 200 HP: $18,000 - 250 HP: $22,000 |
| Mercury | - 2.5 HP: $900 - 4 HP: $1,400 - 6 HP: $1,800 - 8 HP: $2,000 - 15 HP: $2,600 - 20 HP: $3,600 |
| Suzuki | - 2.5 HP: $750 - 6 HP: $1,500 - 15 HP: $2,700 - 20 HP: $2,800 - 25 HP: $3,500 - 30 HP: $4,500 |
| Yamaha | - 2.5 HP: $850 - 15 HP: $2,500 - 25 HP: $3,200 - 40 HP: $5,500 - 60 HP: $7,000 - 90 HP: $8,500 - 150 HP: $13,500 - 200 HP: $17,000 - 300 HP: $22,000 |
PDB Magazine broke down the costs they had researched from popular brands such as Evinrude, Honda, Mercury and Yamaha. According to their research, a 40 h.p. motor could cost $6,671, while a 250 h.p. outboard motor could cost closer to $22,000.
Outboard motor overview
An outboard motor is a self-contained unit which includes an engine, subsidiary systems, and propeller designed to be mounted at the stern of the craft.
Outboard motors will have a certain amount of horsepower, a dry weight, a certain number of cylinders, start type (electric or manual) and a fuel type, which is usually gasoline. The horsepower can range anywhere from 15 to 115 h.p. However, some outboard motors can be as high as 350.
Common shaft lengths include 15, 20 and 25 inches.
Popular brands include Evinrude, Honda, Mercury, Tohatsu and Yamaha.
What are the extra costs?
If purchased online, additional shipping fees may apply, depending on the retailer.
The prices above are for the motor only and wouldn’t include professional installation if you required it. The costs to install a new outboard motor will depend on the size of the motor, where you live and which dealer you hire. On average, be prepared to spend another $400 to $1,200.
Don’t forget to budget for future repairs and/or maintenance such as tune-ups and oil changes.
Tips to know
Some of the differences between an inboard and outboard motors can cause you to wonder which one is best. While the horsepower can be the same, an inboard motor will be lighter than an outboard, meaning the boat will be quicker. An outboard motor, however, is easier to work on in case there is a problem or maintenance is needed.
How can I save money?
If you know what to look out for, a slightly used outboard motor can be purchased on eBay for up to 40 percent off. However, if you were to buy used anywhere, try your best to test it in person and check its condition. If buying from a dealer, then it’s wise to find one who will include a limited warranty in case it fails.
How Much Does It Cost to Cut Glass?
Custom cut glass allows you to choose the size, type, edgework, thickness and shape.
Whether it’s for a customized glass table top, mirror, shelf or as a replacement for cracked glass, the costs will vary based on the factors mentioned above.
How much does custom cut glass cost?
The costs to have a professional cut glass can be anywhere from as little as $2 to more than $25 per square foot. As mentioned, the costs will greatly depend on the thickness, the type of glass and the company you choose.
We talked with a few glass companies online and were able to receive quite a few estimates, which we included in our table below.
| Type of Glass | Description | Average Cost (per square foot) |
|---|---|---|
| Annealed | Often used in smaller spaces. It won't shatter into smaller pieces, but if broken, it can produce larger shards. | $20 |
| Ceramic | Able to withstand high temperatures and are often used near fireplaces, labs and stoves. This glass won't shatter, but if broken, it will crack into larger shards. | $56 |
| Laminate | Often used in situations for security purposes. This glass can hold together very well, even when shattered. | $30 |
| Mirror | Mirror glass, as the name implies, will be the glass your mirror is made from. | $20 |
| Shower Door | Often 3/8 to a half of an inch, shower door glass is similar to tempered glass. | $200 |
| Tempered | Used most often as shelving, fireplaces and some table tops. It can break into small pieces if dropped. | $20 |
| Tempered Dual Pane | Consists of two panes of tempered glass that's separated by a spacer. This type of glass is almost always used with residential windows. | $42 |
| Tempered Laminate | A blend between tempered and laminate glass, tempered laminate offers the strength and durability to keep it held together in case of breakage. Often used in overhead applications. | $100 |
NOTE: These price ranges apply to a very simple customized cut job, but this average can drastically drop per square foot if you require more than one square foot. If you were to alter the shape, aside from a basic square, the costs could increase. The same could be said about increasing the thickness, modifying the edgework, changing the glass tint and/or drilling holes. Also, most retailers will have a minimum order requirement before they
On this Gardenweb.com forum thread, members discussed what it would possibly cost to cut a customized piece of glass for a wood table. According to the responses, most said it could cost anywhere from $30 to $75 for the job.
Cutting glass overview
When customizing, a glass cutting service, before they are able to offer a quote, will want to know which type of shape best describes your glass, the measurements, the thickness, glass tint color, the edgework, if you require a logo and if you need any holes drilled or cut out.
Refer to our table below to see what your options commonly are when customizing:
| Color of the Glass | - Bronze - Clear - Dark Grey - Frosted GlueChip - Light Grey - Mistlite - P-516 - Satin Etch - Solex |
| Corners | - Clip/Polished (corners are cut down to a 45-degree angle) - Eased (sharp edges are sanded down) - Radius/Polished (cut down to create a round appearance) |
| Edges | - Beveled Polished - Flat Polished - Ogee Polished - Pencil Polished - Seamed |
| Shapes Commonly Available | - Arch - Circle - Clipped Corners - Ellipse - Half Circle - Hexagon - Octagon - Oval - Parallelogram - Pentagon - Right Triangle - Rounded Corners - Square - Trapezoid - Trinagle |
| Thickness Options (greatly depends on the type of glass) | - 1/8" - 5/32" - 3/16" - 1/4" - 3/8" - 1/2" |
Typically, most jobs, depending on how busy the shop, will take five to seven business days to complete.
What are the extra costs?
Polishing the edges, once the glass has been cut, can be an additional cost.
The same can be said about drilling holes. Each hole that needs to be drilled can cost close to $20 to $30 each, on average.
How can I save money?
Call a few local glass dealers and even check with online retailers as well to see who can offer you the best price. While you don’t solely want to focus on the price, be sure to pay close attention to their reputation, the reviews from past customers and the options they can offer when creating your new custom glass piece.
You can cut your own glass at home, but these tools are recommended for smaller glass projects. Popular tools on Amazon.com often cost less than $15.
How Much Does an Outboard Motor Tune Up Cost?
An outboard motor tune up consists of a series of adjustments, inspections, and parts replacement that will enhance the performance of a motor.
Once in a while, you will need to tune your outboard motor to make sure it stays in good working condition.
How much does an outboard motor tune up cost?
On average, a basic outboard motor tune up should be between $80 and $250+ for just the labor, not including the parts. The cost will all depend on the inclusions, who you hire and the type of motor they are working on. Most will base their estimates on the motor and the number of cylinders.
| Size of Engine | Estimated Costs |
|---|---|
| 2 - 5 h.p. | $75 + materials |
| 5 - 35 h.p. | $90 + materials |
| 35 - 125 h.p. | $115 + materials |
| 135 h.p+ | $135 + materials |
NOTE: For parts, depending on your situation, it’s best to average an additional $150 to $200, but it could be much more, depending on the condition of your motor. Refer to our “extra costs” section below.
BestBoatService.com, for instance, lists its prices on its official website. A minor engine tune up, for example, would cost $85. This service would only replace your spark plugs and the ignition system would be inspected. This wouldn’t include the necessary parts. A major engine tune up, which would cost $255, again, not including the parts, would include replacing the spark plugs, cap, rotor, points, condenser and wires.
On this TheHullTruth.com forum thread, members said the cost of a tune-up would depend on the “type” of tune-up you needed. With no cut or dry answer, the prices would depend on the number of hours on the engine, what’s included and the hourly rate your mechanic is charging. In the, a basic tune-up, with new spark plugs and filters, could cost less than $200, but if you were to receive a new water pump, housing, oil change, diagnostics test and more, it could be more than $450.
What are the extra costs?
Additional repairs or parts may be required during the tune up. For example, a battery change could cost $25 to $35, not including the part. A boat prop repair could cost $75 to $175, while a new water pump impeller housing could cost $500 or more. Another popular repair such as rebuilding the carbs could easily cost $100 to $150 per carb.
In most cases, a tune-up won’t include an oil change, which can be an additional $150+, depending on the size of your motor.
Tips to know
A basic outboard motor tune up, at a minimum, should include a compression and spark test, a spark plug replacement, new water pump impeller, new fuel filter, newly greased fittings and the cylinders will be decarbonized. The sync, link timing, and carburetor should all be set/checked as well.
When storing your motor in colder weather, always refer to your owner’s manual for optimal storage. If you were to have fuel in your motor, for example, then you may want to mix some sort of fuel condition to help keep the motor in tip-top shape come boating time.
How can I save money?
As with any professional service, try your hardest to get as many quotes as possible. As long as you have your engine’s specifications, most can offer a “ballpark” estimate over the phone.
How Much Does an Outboard Motor Rebuild Cost?
If a new motor isn’t in your budget, then a rebuild could be a reasonable alternative.
How much does it cost to rebuild an outboard motor?
The cost of rebuilding an outboard boat motor will depend on the exact type of motor (brand, size and year), the degree of damage, its condition and mechanic performing the rebuild. On average, be prepared to pay a professional mechanic anywhere from $1,500 to as much as $4,500 for an outboard motor rebuild.
If you were to disassemble your motor and ship it to an online company, then the costs could be much less, often as little as $1,000 for a two cylinder motor to as much as $3,500 for a six cylinder.
At TenKillerMarine.com, for instance, they allow you to ship in your motor and provide you with a basic rate sheet to help you budget. A four-cylinder, 90-degree powerhead overhaul would cost $1,895, for example.
We researched the Internet for prices local services charged for rebuilds and included our findings below:
| Type of Motor | Price Quoted |
|---|---|
| 1995 Johnson 25 HP | $1,400 |
| 1990 Johnson 60HP | $1,600 |
| 1982 Johnson 35HP | $1,800 |
| 1981 Johnson 70HP | $2,000 |
| 1998 Johnson 90HP | $2,100 |
| 1984 Evinrude 150HP | $2,500 |
| Volvo inline 6 170HP | $3,300 |
| 1998 Mercury 150HP | $3,500 |
| 1988 Evinrude 225HP | $4,000 |
NOTE: These are the prices if you were to take a boat engine to a local service provider.
Boating Magazine claims if you were to rebuild your engine, it could cost around $2,500, which could be as much as $2,000 cheaper than buying a rebuilt motor from a local dealer.
Rebuild options
Short block rebuild
During a short block rebuild, the electrical components, flywheel, reed plate, intake and carbs will all be removed. Then, all of the cylinders will be bored and new pistons/pistons rings, wrist pins, spark plugs, thermostats, gaskets, the main seals, and bearings will all be replaced.
Dressed powerhead rebuild
A dressed powerhead rebuild option will include the undressing and dressing of the powerhead, boring and honing all cylinders, installing new pistons rings, replacing the main seals, and installing a new set of spark plugs, thermostats and gaskets.
Complete rebuild
A complete rebuild will include all of the inclusions in a short block rebuild, but it will also include a new water impeller, a gear oil change, rebuilt carburetors and a pressure test will be conducted as well.
A good dealer should include a limited warranty that lasts anywhere from one to two years.
What are the extra costs?
Depending on the type of rebuild, a mechanic may find other services that need to be performed now or in the future, which can lead to additional costs.
A water test, if you were to require it, can often be an additional cost. The same can be said about a tuneup.
How can I save money?
Before you consider rebuilding your existing outboard motor, shop rebuilt motors to see if it’s cheaper to buy one instead of rebuilding your own.
Boating Magazine says forget about the rebuild if your motor is older than 1980. If it’s too old, the parts are scarce and the technology is often outdated. In this scenario, most mechanics won’t even recommend it. As for outboard motors exposed to salt water, then any motor older than ten years old should be avoided as well.
If you don’t mind getting your hands dirty and have some knowledge in regards to how a motor works, consider purchasing an outboard motor rebuild kit. These kits will include all of the parts necessary to complete the rebuild and will save you $1,000 to $2,000 or even more.
